What is the primary function of the compressor in a refrigeration cycle?
It receives low-pressure refrigerant gas and compresses it into a high-pressure gas.
Bekijk hier je kaarten, of Meld je aan om te studeren met spaced repetition.
What process occurs to the refrigerant gas as it passes through the condenser?
The gas condenses into a liquid and releases its heat to the outside atmosphere.
Bekijk hier je kaarten, of Meld je aan om te studeren met spaced repetition.
What happens to the refrigerant liquid when it passes through the expansion valve?
The valve restricts the flow of the liquid and lowers its pressure.
Bekijk hier je kaarten, of Meld je aan om te studeren met spaced repetition.
What is the function of the evaporator in a refrigeration cycle?
It absorbs heat from the inside air, causing the refrigerant to change from a liquid to a gas.
Bekijk hier je kaarten, of Meld je aan om te studeren met spaced repetition.
The refrigerant enters the compressor as a _______ and exits as a _______.
The refrigerant enters the compressor as a low-pressure gas and exits as a high-pressure gas.
Bekijk hier je kaarten, of Meld je aan om te studeren met spaced repetition.
In the condenser, the refrigerant changes from a _______ to a _______ while releasing heat to the _______.
In the condenser, the refrigerant changes from a gas to a liquid while releasing heat to the outside atmosphere.
Bekijk hier je kaarten, of Meld je aan om te studeren met spaced repetition.
The expansion valve restricts liquid flow to effectively _______.
The expansion valve restricts liquid flow to effectively lower its pressure.
Bekijk hier je kaarten, of Meld je aan om te studeren met spaced repetition.
Heat from the inside air is absorbed by the refrigerant in the _______, causing a state change from _______ to _______.
Heat from the inside air is absorbed by the refrigerant in the evaporator, causing a state change from liquid to gas.
Bekijk hier je kaarten, of Meld je aan om te studeren met spaced repetition.
Which two components in a refrigeration cycle are associated with the 'high pressure' side?
Bekijk hier je kaarten, of Meld je aan om te studeren met spaced repetition.
Which two components in a refrigeration cycle are associated with the 'low pressure' side?
Bekijk hier je kaarten, of Meld je aan om te studeren met spaced repetition.
What is the primary effect of heat on the physical state of matter?
The presence or absence of heat can change the physical state of matter, such as solid to liquid or liquid to gas, and vice versa.
Bekijk hier je kaarten, of Meld je aan om te studeren met spaced repetition.
How is heat transferred from high to low temperature according to the first law of refrigeration?
Through the process called conduction.
Bekijk hier je kaarten, of Meld je aan om te studeren met spaced repetition.
What are common examples of conductors for heat transfer?
Bekijk hier je kaarten, of Meld je aan om te studeren met spaced repetition.
The first law of refrigeration defines _______ as the transfer of heat through a conductor such as metal, water, or air.
The first law of refrigeration defines conduction as the transfer of heat through a conductor such as metal, water, or air.
Bekijk hier je kaarten, of Meld je aan om te studeren met spaced repetition.
What happens to a liquid when it is exposed to heat and reaches its boiling point?
It changes state from liquid to vapor or gas.
Bekijk hier je kaarten, of Meld je aan om te studeren met spaced repetition.
Liquids change state from liquid to vapor or gas when they attain their respective _______.
Liquids change state from liquid to vapor or gas when they attain their respective boiling point.
Bekijk hier je kaarten, of Meld je aan om te studeren met spaced repetition.
According to the third law of refrigeration, what causes vapor to transform into liquid?
Removing heat from vapor causes it to transform into liquid, which happens when heat is radiated.
Bekijk hier je kaarten, of Meld je aan om te studeren met spaced repetition.
Removing _______ from vapor will transform it into liquid, a process that occurs when heat is radiated.
Removing heat from vapor will transform it into liquid, a process that occurs when heat is radiated.
Bekijk hier je kaarten, of Meld je aan om te studeren met spaced repetition.
What is the relationship between pressure and temperature in refrigeration?
Pressure is directly proportional to temperature.
Bekijk hier je kaarten, of Meld je aan om te studeren met spaced repetition.
In refrigeration, pressure is directly _______ to temperature.
In refrigeration, pressure is directly proportional to temperature.
Bekijk hier je kaarten, of Meld je aan om te studeren met spaced repetition.
What instrument is used to measure both pressure and temperature in a refrigeration system?
A gauge manifold. 
Bekijk hier je kaarten, of Meld je aan om te studeren met spaced repetition.
A _______ is used to measure pressure and temperature in a refrigeration system. 
A gauge manifold is used to measure pressure and temperature in a refrigeration system. 
Bekijk hier je kaarten, of Meld je aan om te studeren met spaced repetition.
What is the primary definition of refrigeration?
It is a process of transferring heat to reduce and maintain the temperature of a space or material below the temperature of the surroundings.
Bekijk hier je kaarten, of Meld je aan om te studeren met spaced repetition.
What is the most common use for refrigeration?
Preserving food to help it last longer by keeping it in cool areas.
Bekijk hier je kaarten, of Meld je aan om te studeren met spaced repetition.
How is temperature defined in the context of substances?
It is the measurement of the heat level in a substance, or the hotness or coldness of a body.
Bekijk hier je kaarten, of Meld je aan om te studeren met spaced repetition.
Which instrument is used to measure the temperature of a substance?
A thermometer.
Bekijk hier je kaarten, of Meld je aan om te studeren met spaced repetition.
Which component is referred to as the 'heart' of a refrigeration system?
The compressor.
Bekijk hier je kaarten, of Meld je aan om te studeren met spaced repetition.
What is the function of a compressor in a refrigeration system?
It compresses low-pressure gas refrigerant into high-pressure gas refrigerant, lowers the pressure in the evaporator, and keeps the refrigerant moving.
Bekijk hier je kaarten, of Meld je aan om te studeren met spaced repetition.
What is an evaporator in a refrigeration system?
It is a coil of tubes where heat is absorbed, also known as a freezer, cooling coil, or chilling unit.
Bekijk hier je kaarten, of Meld je aan om te studeren met spaced repetition.
Where is the evaporator located in a refrigeration system?
On the low-pressure side of the system.
Bekijk hier je kaarten, of Meld je aan om te studeren met spaced repetition.
What is the function of a condenser in a refrigeration system?
It is a coil of tubes where the heat absorbed by the evaporator is discharged into the atmosphere.
Bekijk hier je kaarten, of Meld je aan om te studeren met spaced repetition.
Where is the condenser located in a refrigeration system?
On the high-pressure side of the system.
Bekijk hier je kaarten, of Meld je aan om te studeren met spaced repetition.
What is the purpose of the expansion valve in a refrigeration system?
It is a metering device that controls refrigerant flow and reduces high-pressure liquid refrigerant to low-pressure liquid to maintain efficiency without overloading the compressor.
Bekijk hier je kaarten, of Meld je aan om te studeren met spaced repetition.
The _______ is known as the heart of the refrigeration system, while the _______ is located on the low-pressure side and the _______ is on the high-pressure side.
The compressor is known as the heart of the refrigeration system, while the evaporator is located on the low-pressure side and the condenser is on the high-pressure side.
Bekijk hier je kaarten, of Meld je aan om te studeren met spaced repetition.
What is the primary function of a refrigerant in a refrigeration system?
To absorb heat during evaporation and reject heat during condensation.
Bekijk hier je kaarten, of Meld je aan om te studeren met spaced repetition.
Besides heat transfer, what is another purpose of the refrigerant in some systems?
To bring the oil back to the compressor.
Bekijk hier je kaarten, of Meld je aan om te studeren met spaced repetition.
What defines a pure refrigerant?
A pure refrigerant consists of a single component and one type of molecule, and its composition does not change during boiling or condensing.
Bekijk hier je kaarten, of Meld je aan om te studeren met spaced repetition.
How are refrigerant 'blends' defined?
They are fluids composed of more than one component or type of molecule.
Bekijk hier je kaarten, of Meld je aan om te studeren met spaced repetition.
What is the defining characteristic of an azeotropic blend during phase changes?
It acts as a single component mixture where the composition does not change, and it evaporates or condenses at a constant temperature for a given pressure.
Bekijk hier je kaarten, of Meld je aan om te studeren met spaced repetition.
How do zeotropic refrigerants behave during phase changes under constant pressure?
Their evaporating and condensing temperatures change because the composition of the fluid shifts during the process.
Bekijk hier je kaarten, of Meld je aan om te studeren met spaced repetition.
What is the defining feature of a near-azeotropic refrigerant?
It exhibits a small amount of 'glide' in its composition.
Bekijk hier je kaarten, of Meld je aan om te studeren met spaced repetition.
What temperature difference is used by researchers to distinguish near-azeotropic refrigerants from zeotropic ones?
A glide temperature of \(5.6 \text{ K}\).
Bekijk hier je kaarten, of Meld je aan om te studeren met spaced repetition.
What is meant by the 'boiling point' of a material?
The temperature at which the material changes from a liquid to a gas.
Bekijk hier je kaarten, of Meld je aan om te studeren met spaced repetition.
How does the boiling point of a substance compare to its condensation point?
The boiling point and condensation point are the same temperature.
Bekijk hier je kaarten, of Meld je aan om te studeren met spaced repetition.
What method did the ancient Greeks and Romans use to preserve food?
They placed food in snow.
Bekijk hier je kaarten, of Meld je aan om te studeren met spaced repetition.
How was food preserved in tropical countries before modern refrigeration?
Food was placed in vessels and immersed in streams or stored in holes dug at the riverside.
Bekijk hier je kaarten, of Meld je aan om te studeren met spaced repetition.
What device was commonly used in the 'early time' period for food preservation?
An ice box.
Bekijk hier je kaarten, of Meld je aan om te studeren met spaced repetition.
Who introduced the first patent for a practical ice-making machine in 1834?
Jacob Perkins.
Bekijk hier je kaarten, of Meld je aan om te studeren met spaced repetition.
Following the invention of the ice-making machine, ice makers were manufactured over the next 50 years in _______, _______, _______, and other countries.
Following the invention of the ice-making machine, ice makers were manufactured over the next 50 years in the US, France, Germany, and other countries.
Bekijk hier je kaarten, of Meld je aan om te studeren met spaced repetition.
Besides food, what items are commonly preserved using modern refrigeration technology?
Chemicals, metals, medicines, gases, machines, tools, and electronic devices.
Bekijk hier je kaarten, of Meld je aan om te studeren met spaced repetition.
What components in a refrigeration system are commonly connected using copper tubing?
The evaporator coil, compressor, and expansion valve.
Bekijk hier je kaarten, of Meld je aan om te studeren met spaced repetition.
What is the typical diameter range for copper tubing used in refrigeration?
1/8 inch to 3/4 inch.
Bekijk hier je kaarten, of Meld je aan om te studeren met spaced repetition.
Why should the ends of copper tubing be capped or plugged when not in use?
To keep the inside of the tubing clean and dry.
Bekijk hier je kaarten, of Meld je aan om te studeren met spaced repetition.
How must soft copper tubing be supported during installation?
By suitable brackets or clamps.
Bekijk hier je kaarten, of Meld je aan om te studeren met spaced repetition.
What is the required joining method for hard drawn copper tubing?
Silver brazing.
Bekijk hier je kaarten, of Meld je aan om te studeren met spaced repetition.
What are the primary physical properties of stainless steel tubing?
It is strong and highly resistant to corrosion.
Bekijk hier je kaarten, of Meld je aan om te studeren met spaced repetition.
In what industries is stainless steel tubing commonly required?
Bekijk hier je kaarten, of Meld je aan om te studeren met spaced repetition.
What material is plastic tubing commonly made of for use in water-cooled condensers?
Polyethylene.
Bekijk hier je kaarten, of Meld je aan om te studeren met spaced repetition.
What is the shape of fittings for copper tubing, and why is this shape used?
They are hexagonal in shape to facilitate wrench attachment.
Bekijk hier je kaarten, of Meld je aan om te studeren met spaced repetition.
What is the primary function of a fitting in a tubing system?
To connect tubes of various widths and lengths.
Bekijk hier je kaarten, of Meld je aan om te studeren met spaced repetition.
Which methods are used to create connections with steel tubing?
Flare joints or silver brazing.
Bekijk hier je kaarten, of Meld je aan om te studeren met spaced repetition.
Hard drawn copper tubing is _______ and _______, so it should not be bent during installation.
Hard drawn copper tubing is rigid and stiff, so it should not be bent during installation.
Bekijk hier je kaarten, of Meld je aan om te studeren met spaced repetition.
What is the primary definition of refrigeration?
Refrigeration is the process of removing heat from an enclosed space or substance to lower its temperature and maintain it below room temperature.
Bekijk hier je kaarten, of Meld je aan om te studeren met spaced repetition.
Refrigeration is defined as the process of removing _______ from an enclosed space or substance to lower its _______ and maintain it below _______.
Refrigeration is defined as the process of removing heat from an enclosed space or substance to lower its temperature and maintain it below room temperature.
Bekijk hier je kaarten, of Meld je aan om te studeren met spaced repetition.
What is the primary function of the compressor in a refrigeration cycle?
It receives low-pressure refrigerant gas and compresses it into a high-pressure gas.
What process occurs to the refrigerant gas as it passes through the condenser?
The gas condenses into a liquid and releases its heat to the outside atmosphere.
What happens to the refrigerant liquid when it passes through the expansion valve?
The valve restricts the flow of the liquid and lowers its pressure.
What is the function of the evaporator in a refrigeration cycle?
It absorbs heat from the inside air, causing the refrigerant to change from a liquid to a gas.
The refrigerant enters the compressor as a low-pressure gas and exits as a high-pressure gas.
In the condenser, the refrigerant changes from a gas to a liquid while releasing heat to the outside atmosphere.
The expansion valve restricts liquid flow to effectively lower its pressure.
Heat from the inside air is absorbed by the refrigerant in the evaporator, causing a state change from liquid to gas.
Which two components in a refrigeration cycle are associated with the 'high pressure' side?
Which two components in a refrigeration cycle are associated with the 'low pressure' side?
What is the primary effect of heat on the physical state of matter?
The presence or absence of heat can change the physical state of matter, such as solid to liquid or liquid to gas, and vice versa.
How is heat transferred from high to low temperature according to the first law of refrigeration?
Through the process called conduction.
What are common examples of conductors for heat transfer?
The first law of refrigeration defines conduction as the transfer of heat through a conductor such as metal, water, or air.
What happens to a liquid when it is exposed to heat and reaches its boiling point?
It changes state from liquid to vapor or gas.
Liquids change state from liquid to vapor or gas when they attain their respective boiling point.
According to the third law of refrigeration, what causes vapor to transform into liquid?
Removing heat from vapor causes it to transform into liquid, which happens when heat is radiated.
Removing heat from vapor will transform it into liquid, a process that occurs when heat is radiated.
What is the relationship between pressure and temperature in refrigeration?
Pressure is directly proportional to temperature.
In refrigeration, pressure is directly proportional to temperature.
What instrument is used to measure both pressure and temperature in a refrigeration system?
A gauge manifold. 
A gauge manifold is used to measure pressure and temperature in a refrigeration system. 
What is the primary definition of refrigeration?
It is a process of transferring heat to reduce and maintain the temperature of a space or material below the temperature of the surroundings.
What is the most common use for refrigeration?
Preserving food to help it last longer by keeping it in cool areas.
How is temperature defined in the context of substances?
It is the measurement of the heat level in a substance, or the hotness or coldness of a body.
Which instrument is used to measure the temperature of a substance?
A thermometer.
Which component is referred to as the 'heart' of a refrigeration system?
The compressor.
What is the function of a compressor in a refrigeration system?
It compresses low-pressure gas refrigerant into high-pressure gas refrigerant, lowers the pressure in the evaporator, and keeps the refrigerant moving.
What is an evaporator in a refrigeration system?
It is a coil of tubes where heat is absorbed, also known as a freezer, cooling coil, or chilling unit.
Where is the evaporator located in a refrigeration system?
On the low-pressure side of the system.
What is the function of a condenser in a refrigeration system?
It is a coil of tubes where the heat absorbed by the evaporator is discharged into the atmosphere.
Where is the condenser located in a refrigeration system?
On the high-pressure side of the system.
What is the purpose of the expansion valve in a refrigeration system?
It is a metering device that controls refrigerant flow and reduces high-pressure liquid refrigerant to low-pressure liquid to maintain efficiency without overloading the compressor.
The compressor is known as the heart of the refrigeration system, while the evaporator is located on the low-pressure side and the condenser is on the high-pressure side.
What is the primary function of a refrigerant in a refrigeration system?
To absorb heat during evaporation and reject heat during condensation.
Besides heat transfer, what is another purpose of the refrigerant in some systems?
To bring the oil back to the compressor.
What defines a pure refrigerant?
A pure refrigerant consists of a single component and one type of molecule, and its composition does not change during boiling or condensing.
How are refrigerant 'blends' defined?
They are fluids composed of more than one component or type of molecule.
What is the defining characteristic of an azeotropic blend during phase changes?
It acts as a single component mixture where the composition does not change, and it evaporates or condenses at a constant temperature for a given pressure.
How do zeotropic refrigerants behave during phase changes under constant pressure?
Their evaporating and condensing temperatures change because the composition of the fluid shifts during the process.
What is the defining feature of a near-azeotropic refrigerant?
It exhibits a small amount of 'glide' in its composition.
What temperature difference is used by researchers to distinguish near-azeotropic refrigerants from zeotropic ones?
A glide temperature of \(5.6 \text{ K}\).
What is meant by the 'boiling point' of a material?
The temperature at which the material changes from a liquid to a gas.
How does the boiling point of a substance compare to its condensation point?
The boiling point and condensation point are the same temperature.
What method did the ancient Greeks and Romans use to preserve food?
They placed food in snow.
How was food preserved in tropical countries before modern refrigeration?
Food was placed in vessels and immersed in streams or stored in holes dug at the riverside.
What device was commonly used in the 'early time' period for food preservation?
An ice box.
Who introduced the first patent for a practical ice-making machine in 1834?
Jacob Perkins.
Following the invention of the ice-making machine, ice makers were manufactured over the next 50 years in the US, France, Germany, and other countries.
Besides food, what items are commonly preserved using modern refrigeration technology?
Chemicals, metals, medicines, gases, machines, tools, and electronic devices.
What components in a refrigeration system are commonly connected using copper tubing?
The evaporator coil, compressor, and expansion valve.
What is the typical diameter range for copper tubing used in refrigeration?
1/8 inch to 3/4 inch.
Why should the ends of copper tubing be capped or plugged when not in use?
To keep the inside of the tubing clean and dry.
How must soft copper tubing be supported during installation?
By suitable brackets or clamps.
What is the required joining method for hard drawn copper tubing?
Silver brazing.
What are the primary physical properties of stainless steel tubing?
It is strong and highly resistant to corrosion.
In what industries is stainless steel tubing commonly required?
What material is plastic tubing commonly made of for use in water-cooled condensers?
Polyethylene.
What is the shape of fittings for copper tubing, and why is this shape used?
They are hexagonal in shape to facilitate wrench attachment.
What is the primary function of a fitting in a tubing system?
To connect tubes of various widths and lengths.
Which methods are used to create connections with steel tubing?
Flare joints or silver brazing.
Hard drawn copper tubing is rigid and stiff, so it should not be bent during installation.
What is the primary definition of refrigeration?
Refrigeration is the process of removing heat from an enclosed space or substance to lower its temperature and maintain it below room temperature.
Refrigeration is defined as the process of removing heat from an enclosed space or substance to lower its temperature and maintain it below room temperature.
Weet je zeker dat je de volgende 0 flashcard(s) wilt verwijderen? Dit kun je niet ongedaan maken.
Kies tags om te verwijderen uit 0 geselecteerde flashcard(s):
Tags laden...