What is the primary characteristic of Borosilicate glass?
It is silica-containing and tolerates heating and sterilization for lengthy periods.
Просматривай карточки здесь или зарегистрируйся, чтобы учиться с помощью интервальных повторений.
Why is Aluminosilicate glass often preferred for laboratory use?
It has higher silica content than Borosilicate, making it six times stronger and more resistant to scratching and alkali attack.
Просматривай карточки здесь или зарегистрируйся, чтобы учиться с помощью интервальных повторений.
What distinguishes the piston mechanism of an air-displacement pipette from a positive-displacement pipette?
Просматривай карточки здесь или зарегистрируйся, чтобы учиться с помощью интервальных повторений.
Which pipette design is recommended for highly viscous samples?
Positive-displacement pipettes.
Просматривай карточки здесь или зарегистрируйся, чтобы учиться с помощью интервальных повторений.
What is the primary benefit of a fixed-angle centrifuge compared to a swinging bucket centrifuge?
It allows for higher speeds with significantly less heat build-up due to reduced air friction.
Просматривай карточки здесь или зарегистрируйся, чтобы учиться с помощью интервальных повторений.
What is the formula to convert revolutions per minute (rpm) to relative centrifugal force (RCF)?
\(RCF = 1.118 \times 10^{-5} \times \text{radius of centrifuge head in cm} \times rpm^2\)
Просматривай карточки здесь или зарегистрируйся, чтобы учиться с помощью интервальных повторений.
What is the specific use of a Cytocentrifuge in a laboratory setting?
It is used for cell counts in body fluids.
Просматривай карточки здесь или зарегистрируйся, чтобы учиться с помощью интервальных повторений.
What are the common applications for Analytic Grade Reagent (ACS) chemicals?
They are used for analytic procedures requiring a high degree of purity.
Просматривай карточки здесь или зарегистрируйся, чтобы учиться с помощью интервальных повторений.
What is the primary usage for Technical or Commercial Grade chemicals?
These chemicals are intended for industrial use only.
Просматривай карточки здесь или зарегистрируйся, чтобы учиться с помощью интервальных повторений.
What is the correct sequence for donning personal protective equipment?
Просматривай карточки здесь или зарегистрируйся, чтобы учиться с помощью интервальных повторений.
What is the correct sequence for doffing personal protective equipment?
Просматривай карточки здесь или зарегистрируйся, чтобы учиться с помощью интервальных повторений.
What are the required contact times to inactivate HBV and HIV during decontamination?
Просматривай карточки здесь или зарегистрируйся, чтобы учиться с помощью интервальных повторений.
Which biological safety cabinet (BSC) class is recommended for COVID-19 RT-PCR testing?
Class II, type A2.
Просматривай карточки здесь или зарегистрируйся, чтобы учиться с помощью интервальных повторений.
Describe the main characteristics and primary use of a Class III biological safety cabinet.
It is a completely enclosed, gas-tight chamber operating under negative pressure. It is used for extremely hazardous organisms, such as those requiring BSL 4 containment. 
Просматривай карточки здесь или зарегистрируйся, чтобы учиться с помощью интервальных повторений.
What is the primary purpose of an MSDS (Material Safety Data Sheet)?
It serves as a major source of safety information for employees who may use hazardous materials in their occupations.
Просматривай карточки здесь или зарегистрируйся, чтобы учиться с помощью интервальных повторений.
How does the Threshold Limit Value (TLV) relate to the toxicity of a substance?
The TLV is inversely proportional to toxicity, meaning higher toxicity corresponds to a lower TLV.
Просматривай карточки здесь или зарегистрируйся, чтобы учиться с помощью интервальных повторений.
According to the radiation hazard table, what type of radiation is considered to have a wavelength greater than \(1\text{ cm}\)?
Low frequency radiation.
Просматривай карточки здесь или зарегистрируйся, чтобы учиться с помощью интервальных повторений.
Which color of container or bag should be used for the disposal of non-infectious wet waste?
Green.
Просматривай карточки здесь или зарегистрируйся, чтобы учиться с помощью интервальных повторений.
What are the appropriate fire extinguishers to use for Class B fires, which involve flammable liquids and gases?
Просматривай карточки здесь или зарегистрируйся, чтобы учиться с помощью интервальных повторений.
What does the GHS flame pictogram indicate?
It indicates flammable, pyrophoric, or self-heating materials, as well as substances that emit flammable gas or contain organic peroxides.
Просматривай карточки здесь или зарегистрируйся, чтобы учиться с помощью интервальных повторений.
In the NFPA 704 system, what does a health hazard rating of 4 represent?
Deadly.
Просматривай карточки здесь или зарегистрируйся, чтобы учиться с помощью интервальных повторений.
How is molarity defined?
The number of moles of solute per liter (L) of solution.
Просматривай карточки здесь или зарегистрируйся, чтобы учиться с помощью интервальных повторений.
How is molality defined?
The number of moles of solute per kilogram (kg) of solvent.
Просматривай карточки здесь или зарегистрируйся, чтобы учиться с помощью интервальных повторений.
How is normality defined?
The number of equivalent weights of solute per liter (L) of solution.
Просматривай карточки здесь или зарегистрируйся, чтобы учиться с помощью интервальных повторений.
What does percentage weight by volume (% w/v) represent?
The amount of solute per 100 total units of solution, often expressed as \(g/100 mL\) or \(g/dL\).
Просматривай карточки здесь или зарегистрируйся, чтобы учиться с помощью интервальных повторений.
What formula is used to calculate the concentration of diluted solutions?
\(C_1V_1 = C_2V_2\)
Просматривай карточки здесь или зарегистрируйся, чтобы учиться с помощью интервальных повторений.
What formula determines molarity (\(M\)) if you have the concentration in \(g/L\) and the molecular weight (\(MW\))?
\(M = \frac{g/L}{MW}\)
Просматривай карточки здесь или зарегистрируйся, чтобы учиться с помощью интервальных повторений.
What formula determines normality (\(N\)) if you have the concentration in \(g/L\) and the equivalent weight (\(EW\))?
\(N = \frac{g/L}{EW}\)
Просматривай карточки здесь или зарегистрируйся, чтобы учиться с помощью интервальных повторений.
How is a dilution defined?
The volume of sample divided by the total volume of solution.
Просматривай карточки здесь или зарегистрируйся, чтобы учиться с помощью интервальных повторений.
What is the formula to calculate the arithmetic mean (\(\bar{x}\))?
Просматривай карточки здесь или зарегистрируйся, чтобы учиться с помощью интервальных повторений.
What is the formula for the standard deviation (\(s\))?
Просматривай карточки здесь или зарегистрируйся, чтобы учиться с помощью интервальных повторений.
What is the formula for the coefficient of variation (\(CV\))?
Просматривай карточки здесь или зарегистрируйся, чтобы учиться с помощью интервальных повторений.
According to the 68-95-99 rule for normally distributed data, what percentage of values falls within 1 standard deviation (\(1SD\)) from the mean?
68%
Просматривай карточки здесь или зарегистрируйся, чтобы учиться с помощью интервальных повторений.
How is the reference interval (\(RI\)) established when no existing interval exists for an analyte?
It is set as \(\(\bar{x} \pm 2s\)\) and requires at least 120 study individuals.
Просматривай карточки здесь или зарегистрируйся, чтобы учиться с помощью интервальных повторений.
What is the formula for diagnostic sensitivity?
Просматривай карточки здесь или зарегистрируйся, чтобы учиться с помощью интервальных повторений.
What is the formula for diagnostic specificity?
Просматривай карточки здесь или зарегистрируйся, чтобы учиться с помощью интервальных повторений.
If a lab professional wants to convert a Conventional Unit to an SI Unit, what calculation should be performed?
Multiply the value by the conversion factor.
Просматривай карточки здесь или зарегистрируйся, чтобы учиться с помощью интервальных повторений.
What is the primary goal of laboratory Quality Control?
The primary goal is to ensure reliability by maintaining both accuracy and precision.
Просматривай карточки здесь или зарегистрируйся, чтобы учиться с помощью интервальных повторений.
What are the three main phases of Quality Assurance?
Просматривай карточки здесь или зарегистрируйся, чтобы учиться с помощью интервальных повторений.
How do accuracy and precision differ in laboratory testing?
Accuracy is the closeness of a result to the true or actual value, while precision is the ability of a test to produce a series of results that agree closely with each other.
Просматривай карточки здесь или зарегистрируйся, чтобы учиться с помощью интервальных повторений.
What is the formula used to calculate the Standard Deviation Index (\(SDI\))?
Просматривай карточки здесь или зарегистрируйся, чтобы учиться с помощью интервальных повторений.
What distinguishes random error from systematic error in laboratory testing?
Random error is caused by unpredictable factors and affects precision, while systematic error occurs in one direction and affects accuracy.
Просматривай карточки здесь или зарегистрируйся, чтобы учиться с помощью интервальных повторений.
What is the difference between a 'shift' and a 'trend' in quality control charts?
A shift is an abrupt change where control values distribute on one side of the mean for six consecutive days. A trend is a gradual increase or decrease of control values over six consecutive days that passes through the mean.
Просматривай карточки здесь или зарегистрируйся, чтобы учиться с помощью интервальных повторений.
Which Westgard rules are used to detect systematic error?
Просматривай карточки здесь или зарегистрируйся, чтобы учиться с помощью интервальных повторений.
How do internal and external benchmarking differ in laboratory quality management?
Internal benchmarking involves setting and meeting standards for your own lab, while external benchmarking compares a lab's productivity with that of other laboratories to identify best practices.
Просматривай карточки здесь или зарегистрируйся, чтобы учиться с помощью интервальных повторений.
What performance level is targeted in the Six Sigma approach to laboratory quality?
The goal is to reduce errors to \(3.4\) defects per million laboratory tests.
Просматривай карточки здесь или зарегистрируйся, чтобы учиться с помощью интервальных повторений.
Which veins are primarily used for venipuncture in the antecubital fossa?
The median cubital, cephalic, and basilic veins.
Просматривай карточки здесь или зарегистрируйся, чтобы учиться с помощью интервальных повторений.
Why is ethanol prohibited when collecting samples for an ethanol assay?
It can falsely increase results in osmometry and gas chromatography testing.
Просматривай карточки здесь или зарегистрируйся, чтобы учиться с помощью интервальных повторений.
What is the primary function of Heparin when used as an additive in collection tubes?
It inhibits thrombin.
Просматривай карточки здесь или зарегистрируйся, чтобы учиться с помощью интервальных повторений.
What is the main purpose of Sodium fluoride as an additive in blood collection tubes?
It prevents glycolysis.
Просматривай карточки здесь или зарегистрируйся, чтобы учиться с помощью интервальных повторений.
What is the mnemonic sequence for the Order of Draw in multiple tube collections?
Stop (SPS/Sterile), Light (Light blue/Coagulation), Red (Red/Plastic), Stay (SST/Separator), Put (PST/Plasma), Green (Heparin), Light (Lavender/EDTA), Go (Gray/Fluoride).
Просматривай карточки здесь или зарегистрируйся, чтобы учиться с помощью интервальных повторений.
What is the typical use for a 20-gauge (yellow) venipuncture needle?
It is used when large-volume tubes are collected or large-volume syringes are used on patients with normal-size veins.
Просматривай карточки здесь или зарегистрируйся, чтобы учиться с помощью интервальных повторений.
When should a 23-gauge (blue) butterfly needle be used?
It is used on the veins of infants and children and on difficult or hands veins of adults.
Просматривай карточки здесь или зарегистрируйся, чтобы учиться с помощью интервальных повторений.
What is the recommended lancet blade length for heelsticks in capillary puncture?
1.75 mm
Просматривай карточки здесь или зарегистрируйся, чтобы учиться с помощью интервальных повторений.
What is the primary purpose of the Modified Allen Test before radial arterial puncture?
To ensure that the ulnar artery can provide adequate collateral blood flow to the hand if the radial artery is damaged.
Просматривай карточки здесь или зарегистрируйся, чтобы учиться с помощью интервальных повторений.
How does extreme altitude (\(>5,000\) ft) affect evacuated tube blood draw volume?
It causes a decrease in draw volume.
Просматривай карточки здесь или зарегистрируйся, чтобы учиться с помощью интервальных повторений.
What is a common complication of phlebotomy regarding pediatric patients specifically?
Iatrogenic anemia, which results from blood loss due to frequent testing.
Просматривай карточки здесь или зарегистрируйся, чтобы учиться с помощью интервальных повторений.
What effect does physical activity or exercise have on lactic acid levels in a patient's blood sample?
Exercise leads to an increase in lactic acid levels.
Просматривай карточки здесь или зарегистрируйся, чтобы учиться с помощью интервальных повторений.
Which analytes may require protection from light during specimen handling?
Просматривай карточки здесь или зарегистрируйся, чтобы учиться с помощью интервальных повторений.
What is the formula for Beer's Law, and what does each variable represent?
\(A = abc\), where \(A\) is absorbance, \(a\) is molar absorptivity, \(b\) is the light path (diameter of the cuvette in cm), and \(c\) is the concentration.
Просматривай карточки здесь или зарегистрируйся, чтобы учиться с помощью интервальных повторений.
What are the wavelength ranges for ultraviolet, visible, and infrared light?
Просматривай карточки здесь или зарегистрируйся, чтобы учиться с помощью интервальных повторений.
What is meant by linearity in spectrophotometry, and what happens when it is compromised?
Linearity refers to a direct relationship where a change in concentration results in a straight-line calibration curve. A loss of linearity can occur due to stray light or other errors, causing the absorbance not to match the concentration proportionally.
Просматривай карточки здесь или зарегистрируйся, чтобы учиться с помощью интервальных повторений.
What are the two common types of double-beam spectrophotometers?
Просматривай карточки здесь или зарегистрируйся, чтобы учиться с помощью интервальных повторений.
What is the primary principle of fluorometry?
Fluorometry, also known as molecular emission spectroscopy, measures the amount of light emitted by molecules that have been excited by a light source.
Просматривай карточки здесь или зарегистрируйся, чтобы учиться с помощью интервальных повторений.
How do the materials used for cuvettes affect their application in spectrophotometry?
Просматривай карточки здесь или зарегистрируйся, чтобы учиться с помощью интервальных повторений.
What is the fundamental mechanism of chemiluminescence?
Chemiluminescence is the measurement of light emitted during a chemical reaction, which is typically catalyzed by an enzyme, a metal, or hemin.
Просматривай карточки здесь или зарегистрируйся, чтобы учиться с помощью интервальных повторений.
What are the two types of scintillation counting and their associated isotopes?
Просматривай карточки здесь или зарегистрируйся, чтобы учиться с помощью интервальных повторений.
What is the difference between measuring light via turbidimetry and nephelometry?
Turbidimetry measures the amount of light blocked, while nephelometry measures the amount of light scattered by a suspension of particles.
Просматривай карточки здесь или зарегистрируйся, чтобы учиться с помощью интервальных повторений.
Which immunoassay technique uses polarized light and a fluorescent label to measure low molecular weight substances?
Fluorescence polarization immunoassay (FPIA).
Просматривай карточки здесь или зарегистрируйся, чтобы учиться с помощью интервальных повторений.
What is the primary role of insulin in regulating glucose?
It is the only hypoglycemic agent; it lowers plasma glucose levels by promoting cellular glucose uptake, glycolysis, and lipogenesis, while inhibiting glycogenolysis.
Просматривай карточки здесь или зарегистрируйся, чтобы учиться с помощью интервальных повторений.
What is the physiological effect of glucagon on blood glucose?
It is a major hyperglycemic hormone; it increases plasma glucose levels by promoting gluconeogenesis and glycogenolysis, while inhibiting glycolysis.
Просматривай карточки здесь или зарегистрируйся, чтобы учиться с помощью интервальных повторений.
What are the three components of Whipple's triad for diagnosing hypoglycemia?
Просматривай карточки здесь или зарегистрируйся, чтобы учиться с помощью интервальных повторений.
What is the fundamental cause of Type 1 diabetes mellitus?
Autoimmune or idiopathic beta cell destruction leading to absolute insulin deficiency.
Просматривай карточки здесь или зарегистрируйся, чтобы учиться с помощью интервальных повторений.
What is the primary characteristic of Borosilicate glass?
It is silica-containing and tolerates heating and sterilization for lengthy periods.
Why is Aluminosilicate glass often preferred for laboratory use?
It has higher silica content than Borosilicate, making it six times stronger and more resistant to scratching and alkali attack.
What distinguishes the piston mechanism of an air-displacement pipette from a positive-displacement pipette?
Which pipette design is recommended for highly viscous samples?
Positive-displacement pipettes.
What is the primary benefit of a fixed-angle centrifuge compared to a swinging bucket centrifuge?
It allows for higher speeds with significantly less heat build-up due to reduced air friction.
What is the formula to convert revolutions per minute (rpm) to relative centrifugal force (RCF)?
\(RCF = 1.118 \times 10^{-5} \times \text{radius of centrifuge head in cm} \times rpm^2\)
What is the specific use of a Cytocentrifuge in a laboratory setting?
It is used for cell counts in body fluids.
What are the common applications for Analytic Grade Reagent (ACS) chemicals?
They are used for analytic procedures requiring a high degree of purity.
What is the primary usage for Technical or Commercial Grade chemicals?
These chemicals are intended for industrial use only.
What is the correct sequence for donning personal protective equipment?
What is the correct sequence for doffing personal protective equipment?
What are the required contact times to inactivate HBV and HIV during decontamination?
Which biological safety cabinet (BSC) class is recommended for COVID-19 RT-PCR testing?
Class II, type A2.
Describe the main characteristics and primary use of a Class III biological safety cabinet.
It is a completely enclosed, gas-tight chamber operating under negative pressure. It is used for extremely hazardous organisms, such as those requiring BSL 4 containment. 
What is the primary purpose of an MSDS (Material Safety Data Sheet)?
It serves as a major source of safety information for employees who may use hazardous materials in their occupations.
How does the Threshold Limit Value (TLV) relate to the toxicity of a substance?
The TLV is inversely proportional to toxicity, meaning higher toxicity corresponds to a lower TLV.
According to the radiation hazard table, what type of radiation is considered to have a wavelength greater than \(1\text{ cm}\)?
Low frequency radiation.
Which color of container or bag should be used for the disposal of non-infectious wet waste?
Green.
What are the appropriate fire extinguishers to use for Class B fires, which involve flammable liquids and gases?
What does the GHS flame pictogram indicate?
It indicates flammable, pyrophoric, or self-heating materials, as well as substances that emit flammable gas or contain organic peroxides.
In the NFPA 704 system, what does a health hazard rating of 4 represent?
Deadly.
How is molarity defined?
The number of moles of solute per liter (L) of solution.
How is molality defined?
The number of moles of solute per kilogram (kg) of solvent.
How is normality defined?
The number of equivalent weights of solute per liter (L) of solution.
What does percentage weight by volume (% w/v) represent?
The amount of solute per 100 total units of solution, often expressed as \(g/100 mL\) or \(g/dL\).
What formula is used to calculate the concentration of diluted solutions?
\(C_1V_1 = C_2V_2\)
What formula determines molarity (\(M\)) if you have the concentration in \(g/L\) and the molecular weight (\(MW\))?
\(M = \frac{g/L}{MW}\)
What formula determines normality (\(N\)) if you have the concentration in \(g/L\) and the equivalent weight (\(EW\))?
\(N = \frac{g/L}{EW}\)
How is a dilution defined?
The volume of sample divided by the total volume of solution.
What is the formula to calculate the arithmetic mean (\(\bar{x}\))?
What is the formula for the standard deviation (\(s\))?
What is the formula for the coefficient of variation (\(CV\))?
According to the 68-95-99 rule for normally distributed data, what percentage of values falls within 1 standard deviation (\(1SD\)) from the mean?
68%
How is the reference interval (\(RI\)) established when no existing interval exists for an analyte?
It is set as \(\(\bar{x} \pm 2s\)\) and requires at least 120 study individuals.
What is the formula for diagnostic sensitivity?
What is the formula for diagnostic specificity?
If a lab professional wants to convert a Conventional Unit to an SI Unit, what calculation should be performed?
Multiply the value by the conversion factor.
What is the primary goal of laboratory Quality Control?
The primary goal is to ensure reliability by maintaining both accuracy and precision.
What are the three main phases of Quality Assurance?
How do accuracy and precision differ in laboratory testing?
Accuracy is the closeness of a result to the true or actual value, while precision is the ability of a test to produce a series of results that agree closely with each other.
What is the formula used to calculate the Standard Deviation Index (\(SDI\))?
What distinguishes random error from systematic error in laboratory testing?
Random error is caused by unpredictable factors and affects precision, while systematic error occurs in one direction and affects accuracy.
What is the difference between a 'shift' and a 'trend' in quality control charts?
A shift is an abrupt change where control values distribute on one side of the mean for six consecutive days. A trend is a gradual increase or decrease of control values over six consecutive days that passes through the mean.
Which Westgard rules are used to detect systematic error?
How do internal and external benchmarking differ in laboratory quality management?
Internal benchmarking involves setting and meeting standards for your own lab, while external benchmarking compares a lab's productivity with that of other laboratories to identify best practices.
What performance level is targeted in the Six Sigma approach to laboratory quality?
The goal is to reduce errors to \(3.4\) defects per million laboratory tests.
Which veins are primarily used for venipuncture in the antecubital fossa?
The median cubital, cephalic, and basilic veins.
Why is ethanol prohibited when collecting samples for an ethanol assay?
It can falsely increase results in osmometry and gas chromatography testing.
What is the primary function of Heparin when used as an additive in collection tubes?
It inhibits thrombin.
What is the main purpose of Sodium fluoride as an additive in blood collection tubes?
It prevents glycolysis.
What is the mnemonic sequence for the Order of Draw in multiple tube collections?
Stop (SPS/Sterile), Light (Light blue/Coagulation), Red (Red/Plastic), Stay (SST/Separator), Put (PST/Plasma), Green (Heparin), Light (Lavender/EDTA), Go (Gray/Fluoride).
What is the typical use for a 20-gauge (yellow) venipuncture needle?
It is used when large-volume tubes are collected or large-volume syringes are used on patients with normal-size veins.
When should a 23-gauge (blue) butterfly needle be used?
It is used on the veins of infants and children and on difficult or hands veins of adults.
What is the recommended lancet blade length for heelsticks in capillary puncture?
1.75 mm
What is the primary purpose of the Modified Allen Test before radial arterial puncture?
To ensure that the ulnar artery can provide adequate collateral blood flow to the hand if the radial artery is damaged.
How does extreme altitude (\(>5,000\) ft) affect evacuated tube blood draw volume?
It causes a decrease in draw volume.
What is a common complication of phlebotomy regarding pediatric patients specifically?
Iatrogenic anemia, which results from blood loss due to frequent testing.
What effect does physical activity or exercise have on lactic acid levels in a patient's blood sample?
Exercise leads to an increase in lactic acid levels.
Which analytes may require protection from light during specimen handling?
What is the formula for Beer's Law, and what does each variable represent?
\(A = abc\), where \(A\) is absorbance, \(a\) is molar absorptivity, \(b\) is the light path (diameter of the cuvette in cm), and \(c\) is the concentration.
What are the wavelength ranges for ultraviolet, visible, and infrared light?
What is meant by linearity in spectrophotometry, and what happens when it is compromised?
Linearity refers to a direct relationship where a change in concentration results in a straight-line calibration curve. A loss of linearity can occur due to stray light or other errors, causing the absorbance not to match the concentration proportionally.
What are the two common types of double-beam spectrophotometers?
What is the primary principle of fluorometry?
Fluorometry, also known as molecular emission spectroscopy, measures the amount of light emitted by molecules that have been excited by a light source.
How do the materials used for cuvettes affect their application in spectrophotometry?
What is the fundamental mechanism of chemiluminescence?
Chemiluminescence is the measurement of light emitted during a chemical reaction, which is typically catalyzed by an enzyme, a metal, or hemin.
What are the two types of scintillation counting and their associated isotopes?
What is the difference between measuring light via turbidimetry and nephelometry?
Turbidimetry measures the amount of light blocked, while nephelometry measures the amount of light scattered by a suspension of particles.
Which immunoassay technique uses polarized light and a fluorescent label to measure low molecular weight substances?
Fluorescence polarization immunoassay (FPIA).
What is the primary role of insulin in regulating glucose?
It is the only hypoglycemic agent; it lowers plasma glucose levels by promoting cellular glucose uptake, glycolysis, and lipogenesis, while inhibiting glycogenolysis.
What is the physiological effect of glucagon on blood glucose?
It is a major hyperglycemic hormone; it increases plasma glucose levels by promoting gluconeogenesis and glycogenolysis, while inhibiting glycolysis.
What are the three components of Whipple's triad for diagnosing hypoglycemia?
What is the fundamental cause of Type 1 diabetes mellitus?
Autoimmune or idiopathic beta cell destruction leading to absolute insulin deficiency.
Вы уверены, что хотите удалить 0 карточку(и)? Это невозможно будет отменить.
Выберите теги для удаления из 0 выбранные карточки:
Загрузка тегов...