What is the primary characteristic of Borosilicate glass?
It is silica-containing and tolerates heating and sterilization for lengthy periods.
ここでカードを閲覧するか、 登録してSpaced Repetitionで学習しよう.
Why is Aluminosilicate glass often preferred for laboratory use?
It has higher silica content than Borosilicate, making it six times stronger and more resistant to scratching and alkali attack.
ここでカードを閲覧するか、 登録してSpaced Repetitionで学習しよう.
What distinguishes the piston mechanism of an air-displacement pipette from a positive-displacement pipette?
ここでカードを閲覧するか、 登録してSpaced Repetitionで学習しよう.
Which pipette design is recommended for highly viscous samples?
Positive-displacement pipettes.
ここでカードを閲覧するか、 登録してSpaced Repetitionで学習しよう.
What is the primary benefit of a fixed-angle centrifuge compared to a swinging bucket centrifuge?
It allows for higher speeds with significantly less heat build-up due to reduced air friction.
ここでカードを閲覧するか、 登録してSpaced Repetitionで学習しよう.
What is the formula to convert revolutions per minute (rpm) to relative centrifugal force (RCF)?
\(RCF = 1.118 \times 10^{-5} \times \text{radius of centrifuge head in cm} \times rpm^2\)
ここでカードを閲覧するか、 登録してSpaced Repetitionで学習しよう.
What is the specific use of a Cytocentrifuge in a laboratory setting?
It is used for cell counts in body fluids.
ここでカードを閲覧するか、 登録してSpaced Repetitionで学習しよう.
What are the common applications for Analytic Grade Reagent (ACS) chemicals?
They are used for analytic procedures requiring a high degree of purity.
ここでカードを閲覧するか、 登録してSpaced Repetitionで学習しよう.
What is the primary usage for Technical or Commercial Grade chemicals?
These chemicals are intended for industrial use only.
ここでカードを閲覧するか、 登録してSpaced Repetitionで学習しよう.
What is the correct sequence for donning personal protective equipment?
ここでカードを閲覧するか、 登録してSpaced Repetitionで学習しよう.
What is the correct sequence for doffing personal protective equipment?
ここでカードを閲覧するか、 登録してSpaced Repetitionで学習しよう.
What are the required contact times to inactivate HBV and HIV during decontamination?
ここでカードを閲覧するか、 登録してSpaced Repetitionで学習しよう.
Which biological safety cabinet (BSC) class is recommended for COVID-19 RT-PCR testing?
Class II, type A2.
ここでカードを閲覧するか、 登録してSpaced Repetitionで学習しよう.
Describe the main characteristics and primary use of a Class III biological safety cabinet.
It is a completely enclosed, gas-tight chamber operating under negative pressure. It is used for extremely hazardous organisms, such as those requiring BSL 4 containment. 
ここでカードを閲覧するか、 登録してSpaced Repetitionで学習しよう.
What is the primary purpose of an MSDS (Material Safety Data Sheet)?
It serves as a major source of safety information for employees who may use hazardous materials in their occupations.
ここでカードを閲覧するか、 登録してSpaced Repetitionで学習しよう.
How does the Threshold Limit Value (TLV) relate to the toxicity of a substance?
The TLV is inversely proportional to toxicity, meaning higher toxicity corresponds to a lower TLV.
ここでカードを閲覧するか、 登録してSpaced Repetitionで学習しよう.
According to the radiation hazard table, what type of radiation is considered to have a wavelength greater than \(1\text{ cm}\)?
Low frequency radiation.
ここでカードを閲覧するか、 登録してSpaced Repetitionで学習しよう.
Which color of container or bag should be used for the disposal of non-infectious wet waste?
Green.
ここでカードを閲覧するか、 登録してSpaced Repetitionで学習しよう.
What are the appropriate fire extinguishers to use for Class B fires, which involve flammable liquids and gases?
ここでカードを閲覧するか、 登録してSpaced Repetitionで学習しよう.
What does the GHS flame pictogram indicate?
It indicates flammable, pyrophoric, or self-heating materials, as well as substances that emit flammable gas or contain organic peroxides.
ここでカードを閲覧するか、 登録してSpaced Repetitionで学習しよう.
In the NFPA 704 system, what does a health hazard rating of 4 represent?
Deadly.
ここでカードを閲覧するか、 登録してSpaced Repetitionで学習しよう.
How is molarity defined?
The number of moles of solute per liter (L) of solution.
ここでカードを閲覧するか、 登録してSpaced Repetitionで学習しよう.
How is molality defined?
The number of moles of solute per kilogram (kg) of solvent.
ここでカードを閲覧するか、 登録してSpaced Repetitionで学習しよう.
How is normality defined?
The number of equivalent weights of solute per liter (L) of solution.
ここでカードを閲覧するか、 登録してSpaced Repetitionで学習しよう.
What does percentage weight by volume (% w/v) represent?
The amount of solute per 100 total units of solution, often expressed as \(g/100 mL\) or \(g/dL\).
ここでカードを閲覧するか、 登録してSpaced Repetitionで学習しよう.
What formula is used to calculate the concentration of diluted solutions?
\(C_1V_1 = C_2V_2\)
ここでカードを閲覧するか、 登録してSpaced Repetitionで学習しよう.
What formula determines molarity (\(M\)) if you have the concentration in \(g/L\) and the molecular weight (\(MW\))?
\(M = \frac{g/L}{MW}\)
ここでカードを閲覧するか、 登録してSpaced Repetitionで学習しよう.
What formula determines normality (\(N\)) if you have the concentration in \(g/L\) and the equivalent weight (\(EW\))?
\(N = \frac{g/L}{EW}\)
ここでカードを閲覧するか、 登録してSpaced Repetitionで学習しよう.
How is a dilution defined?
The volume of sample divided by the total volume of solution.
ここでカードを閲覧するか、 登録してSpaced Repetitionで学習しよう.
What is the formula to calculate the arithmetic mean (\(\bar{x}\))?
ここでカードを閲覧するか、 登録してSpaced Repetitionで学習しよう.
What is the formula for the standard deviation (\(s\))?
ここでカードを閲覧するか、 登録してSpaced Repetitionで学習しよう.
What is the formula for the coefficient of variation (\(CV\))?
ここでカードを閲覧するか、 登録してSpaced Repetitionで学習しよう.
According to the 68-95-99 rule for normally distributed data, what percentage of values falls within 1 standard deviation (\(1SD\)) from the mean?
68%
ここでカードを閲覧するか、 登録してSpaced Repetitionで学習しよう.
How is the reference interval (\(RI\)) established when no existing interval exists for an analyte?
It is set as \(\(\bar{x} \pm 2s\)\) and requires at least 120 study individuals.
ここでカードを閲覧するか、 登録してSpaced Repetitionで学習しよう.
What is the formula for diagnostic sensitivity?
ここでカードを閲覧するか、 登録してSpaced Repetitionで学習しよう.
What is the formula for diagnostic specificity?
ここでカードを閲覧するか、 登録してSpaced Repetitionで学習しよう.
If a lab professional wants to convert a Conventional Unit to an SI Unit, what calculation should be performed?
Multiply the value by the conversion factor.
ここでカードを閲覧するか、 登録してSpaced Repetitionで学習しよう.
What is the primary goal of laboratory Quality Control?
The primary goal is to ensure reliability by maintaining both accuracy and precision.
ここでカードを閲覧するか、 登録してSpaced Repetitionで学習しよう.
What are the three main phases of Quality Assurance?
ここでカードを閲覧するか、 登録してSpaced Repetitionで学習しよう.
How do accuracy and precision differ in laboratory testing?
Accuracy is the closeness of a result to the true or actual value, while precision is the ability of a test to produce a series of results that agree closely with each other.
ここでカードを閲覧するか、 登録してSpaced Repetitionで学習しよう.
What is the formula used to calculate the Standard Deviation Index (\(SDI\))?
ここでカードを閲覧するか、 登録してSpaced Repetitionで学習しよう.
What distinguishes random error from systematic error in laboratory testing?
Random error is caused by unpredictable factors and affects precision, while systematic error occurs in one direction and affects accuracy.
ここでカードを閲覧するか、 登録してSpaced Repetitionで学習しよう.
What is the difference between a 'shift' and a 'trend' in quality control charts?
A shift is an abrupt change where control values distribute on one side of the mean for six consecutive days. A trend is a gradual increase or decrease of control values over six consecutive days that passes through the mean.
ここでカードを閲覧するか、 登録してSpaced Repetitionで学習しよう.
Which Westgard rules are used to detect systematic error?
ここでカードを閲覧するか、 登録してSpaced Repetitionで学習しよう.
How do internal and external benchmarking differ in laboratory quality management?
Internal benchmarking involves setting and meeting standards for your own lab, while external benchmarking compares a lab's productivity with that of other laboratories to identify best practices.
ここでカードを閲覧するか、 登録してSpaced Repetitionで学習しよう.
What performance level is targeted in the Six Sigma approach to laboratory quality?
The goal is to reduce errors to \(3.4\) defects per million laboratory tests.
ここでカードを閲覧するか、 登録してSpaced Repetitionで学習しよう.
Which veins are primarily used for venipuncture in the antecubital fossa?
The median cubital, cephalic, and basilic veins.
ここでカードを閲覧するか、 登録してSpaced Repetitionで学習しよう.
Why is ethanol prohibited when collecting samples for an ethanol assay?
It can falsely increase results in osmometry and gas chromatography testing.
ここでカードを閲覧するか、 登録してSpaced Repetitionで学習しよう.
What is the primary function of Heparin when used as an additive in collection tubes?
It inhibits thrombin.
ここでカードを閲覧するか、 登録してSpaced Repetitionで学習しよう.
What is the main purpose of Sodium fluoride as an additive in blood collection tubes?
It prevents glycolysis.
ここでカードを閲覧するか、 登録してSpaced Repetitionで学習しよう.
What is the mnemonic sequence for the Order of Draw in multiple tube collections?
Stop (SPS/Sterile), Light (Light blue/Coagulation), Red (Red/Plastic), Stay (SST/Separator), Put (PST/Plasma), Green (Heparin), Light (Lavender/EDTA), Go (Gray/Fluoride).
ここでカードを閲覧するか、 登録してSpaced Repetitionで学習しよう.
What is the typical use for a 20-gauge (yellow) venipuncture needle?
It is used when large-volume tubes are collected or large-volume syringes are used on patients with normal-size veins.
ここでカードを閲覧するか、 登録してSpaced Repetitionで学習しよう.
When should a 23-gauge (blue) butterfly needle be used?
It is used on the veins of infants and children and on difficult or hands veins of adults.
ここでカードを閲覧するか、 登録してSpaced Repetitionで学習しよう.
What is the recommended lancet blade length for heelsticks in capillary puncture?
1.75 mm
ここでカードを閲覧するか、 登録してSpaced Repetitionで学習しよう.
What is the primary purpose of the Modified Allen Test before radial arterial puncture?
To ensure that the ulnar artery can provide adequate collateral blood flow to the hand if the radial artery is damaged.
ここでカードを閲覧するか、 登録してSpaced Repetitionで学習しよう.
How does extreme altitude (\(>5,000\) ft) affect evacuated tube blood draw volume?
It causes a decrease in draw volume.
ここでカードを閲覧するか、 登録してSpaced Repetitionで学習しよう.
What is a common complication of phlebotomy regarding pediatric patients specifically?
Iatrogenic anemia, which results from blood loss due to frequent testing.
ここでカードを閲覧するか、 登録してSpaced Repetitionで学習しよう.
What effect does physical activity or exercise have on lactic acid levels in a patient's blood sample?
Exercise leads to an increase in lactic acid levels.
ここでカードを閲覧するか、 登録してSpaced Repetitionで学習しよう.
Which analytes may require protection from light during specimen handling?
ここでカードを閲覧するか、 登録してSpaced Repetitionで学習しよう.
What is the formula for Beer's Law, and what does each variable represent?
\(A = abc\), where \(A\) is absorbance, \(a\) is molar absorptivity, \(b\) is the light path (diameter of the cuvette in cm), and \(c\) is the concentration.
ここでカードを閲覧するか、 登録してSpaced Repetitionで学習しよう.
What are the wavelength ranges for ultraviolet, visible, and infrared light?
ここでカードを閲覧するか、 登録してSpaced Repetitionで学習しよう.
What is meant by linearity in spectrophotometry, and what happens when it is compromised?
Linearity refers to a direct relationship where a change in concentration results in a straight-line calibration curve. A loss of linearity can occur due to stray light or other errors, causing the absorbance not to match the concentration proportionally.
ここでカードを閲覧するか、 登録してSpaced Repetitionで学習しよう.
What are the two common types of double-beam spectrophotometers?
ここでカードを閲覧するか、 登録してSpaced Repetitionで学習しよう.
What is the primary principle of fluorometry?
Fluorometry, also known as molecular emission spectroscopy, measures the amount of light emitted by molecules that have been excited by a light source.
ここでカードを閲覧するか、 登録してSpaced Repetitionで学習しよう.
How do the materials used for cuvettes affect their application in spectrophotometry?
ここでカードを閲覧するか、 登録してSpaced Repetitionで学習しよう.
What is the fundamental mechanism of chemiluminescence?
Chemiluminescence is the measurement of light emitted during a chemical reaction, which is typically catalyzed by an enzyme, a metal, or hemin.
ここでカードを閲覧するか、 登録してSpaced Repetitionで学習しよう.
What are the two types of scintillation counting and their associated isotopes?
ここでカードを閲覧するか、 登録してSpaced Repetitionで学習しよう.
What is the difference between measuring light via turbidimetry and nephelometry?
Turbidimetry measures the amount of light blocked, while nephelometry measures the amount of light scattered by a suspension of particles.
ここでカードを閲覧するか、 登録してSpaced Repetitionで学習しよう.
Which immunoassay technique uses polarized light and a fluorescent label to measure low molecular weight substances?
Fluorescence polarization immunoassay (FPIA).
ここでカードを閲覧するか、 登録してSpaced Repetitionで学習しよう.
What is the primary role of insulin in regulating glucose?
It is the only hypoglycemic agent; it lowers plasma glucose levels by promoting cellular glucose uptake, glycolysis, and lipogenesis, while inhibiting glycogenolysis.
ここでカードを閲覧するか、 登録してSpaced Repetitionで学習しよう.
What is the physiological effect of glucagon on blood glucose?
It is a major hyperglycemic hormone; it increases plasma glucose levels by promoting gluconeogenesis and glycogenolysis, while inhibiting glycolysis.
ここでカードを閲覧するか、 登録してSpaced Repetitionで学習しよう.
What are the three components of Whipple's triad for diagnosing hypoglycemia?
ここでカードを閲覧するか、 登録してSpaced Repetitionで学習しよう.
What is the fundamental cause of Type 1 diabetes mellitus?
Autoimmune or idiopathic beta cell destruction leading to absolute insulin deficiency.
ここでカードを閲覧するか、 登録してSpaced Repetitionで学習しよう.
What is the primary characteristic of Borosilicate glass?
It is silica-containing and tolerates heating and sterilization for lengthy periods.
Why is Aluminosilicate glass often preferred for laboratory use?
It has higher silica content than Borosilicate, making it six times stronger and more resistant to scratching and alkali attack.
What distinguishes the piston mechanism of an air-displacement pipette from a positive-displacement pipette?
Which pipette design is recommended for highly viscous samples?
Positive-displacement pipettes.
What is the primary benefit of a fixed-angle centrifuge compared to a swinging bucket centrifuge?
It allows for higher speeds with significantly less heat build-up due to reduced air friction.
What is the formula to convert revolutions per minute (rpm) to relative centrifugal force (RCF)?
\(RCF = 1.118 \times 10^{-5} \times \text{radius of centrifuge head in cm} \times rpm^2\)
What is the specific use of a Cytocentrifuge in a laboratory setting?
It is used for cell counts in body fluids.
What are the common applications for Analytic Grade Reagent (ACS) chemicals?
They are used for analytic procedures requiring a high degree of purity.
What is the primary usage for Technical or Commercial Grade chemicals?
These chemicals are intended for industrial use only.
What is the correct sequence for donning personal protective equipment?
What is the correct sequence for doffing personal protective equipment?
What are the required contact times to inactivate HBV and HIV during decontamination?
Which biological safety cabinet (BSC) class is recommended for COVID-19 RT-PCR testing?
Class II, type A2.
Describe the main characteristics and primary use of a Class III biological safety cabinet.
It is a completely enclosed, gas-tight chamber operating under negative pressure. It is used for extremely hazardous organisms, such as those requiring BSL 4 containment. 
What is the primary purpose of an MSDS (Material Safety Data Sheet)?
It serves as a major source of safety information for employees who may use hazardous materials in their occupations.
How does the Threshold Limit Value (TLV) relate to the toxicity of a substance?
The TLV is inversely proportional to toxicity, meaning higher toxicity corresponds to a lower TLV.
According to the radiation hazard table, what type of radiation is considered to have a wavelength greater than \(1\text{ cm}\)?
Low frequency radiation.
Which color of container or bag should be used for the disposal of non-infectious wet waste?
Green.
What are the appropriate fire extinguishers to use for Class B fires, which involve flammable liquids and gases?
What does the GHS flame pictogram indicate?
It indicates flammable, pyrophoric, or self-heating materials, as well as substances that emit flammable gas or contain organic peroxides.
In the NFPA 704 system, what does a health hazard rating of 4 represent?
Deadly.
How is molarity defined?
The number of moles of solute per liter (L) of solution.
How is molality defined?
The number of moles of solute per kilogram (kg) of solvent.
How is normality defined?
The number of equivalent weights of solute per liter (L) of solution.
What does percentage weight by volume (% w/v) represent?
The amount of solute per 100 total units of solution, often expressed as \(g/100 mL\) or \(g/dL\).
What formula is used to calculate the concentration of diluted solutions?
\(C_1V_1 = C_2V_2\)
What formula determines molarity (\(M\)) if you have the concentration in \(g/L\) and the molecular weight (\(MW\))?
\(M = \frac{g/L}{MW}\)
What formula determines normality (\(N\)) if you have the concentration in \(g/L\) and the equivalent weight (\(EW\))?
\(N = \frac{g/L}{EW}\)
How is a dilution defined?
The volume of sample divided by the total volume of solution.
What is the formula to calculate the arithmetic mean (\(\bar{x}\))?
What is the formula for the standard deviation (\(s\))?
What is the formula for the coefficient of variation (\(CV\))?
According to the 68-95-99 rule for normally distributed data, what percentage of values falls within 1 standard deviation (\(1SD\)) from the mean?
68%
How is the reference interval (\(RI\)) established when no existing interval exists for an analyte?
It is set as \(\(\bar{x} \pm 2s\)\) and requires at least 120 study individuals.
What is the formula for diagnostic sensitivity?
What is the formula for diagnostic specificity?
If a lab professional wants to convert a Conventional Unit to an SI Unit, what calculation should be performed?
Multiply the value by the conversion factor.
What is the primary goal of laboratory Quality Control?
The primary goal is to ensure reliability by maintaining both accuracy and precision.
What are the three main phases of Quality Assurance?
How do accuracy and precision differ in laboratory testing?
Accuracy is the closeness of a result to the true or actual value, while precision is the ability of a test to produce a series of results that agree closely with each other.
What is the formula used to calculate the Standard Deviation Index (\(SDI\))?
What distinguishes random error from systematic error in laboratory testing?
Random error is caused by unpredictable factors and affects precision, while systematic error occurs in one direction and affects accuracy.
What is the difference between a 'shift' and a 'trend' in quality control charts?
A shift is an abrupt change where control values distribute on one side of the mean for six consecutive days. A trend is a gradual increase or decrease of control values over six consecutive days that passes through the mean.
Which Westgard rules are used to detect systematic error?
How do internal and external benchmarking differ in laboratory quality management?
Internal benchmarking involves setting and meeting standards for your own lab, while external benchmarking compares a lab's productivity with that of other laboratories to identify best practices.
What performance level is targeted in the Six Sigma approach to laboratory quality?
The goal is to reduce errors to \(3.4\) defects per million laboratory tests.
Which veins are primarily used for venipuncture in the antecubital fossa?
The median cubital, cephalic, and basilic veins.
Why is ethanol prohibited when collecting samples for an ethanol assay?
It can falsely increase results in osmometry and gas chromatography testing.
What is the primary function of Heparin when used as an additive in collection tubes?
It inhibits thrombin.
What is the main purpose of Sodium fluoride as an additive in blood collection tubes?
It prevents glycolysis.
What is the mnemonic sequence for the Order of Draw in multiple tube collections?
Stop (SPS/Sterile), Light (Light blue/Coagulation), Red (Red/Plastic), Stay (SST/Separator), Put (PST/Plasma), Green (Heparin), Light (Lavender/EDTA), Go (Gray/Fluoride).
What is the typical use for a 20-gauge (yellow) venipuncture needle?
It is used when large-volume tubes are collected or large-volume syringes are used on patients with normal-size veins.
When should a 23-gauge (blue) butterfly needle be used?
It is used on the veins of infants and children and on difficult or hands veins of adults.
What is the recommended lancet blade length for heelsticks in capillary puncture?
1.75 mm
What is the primary purpose of the Modified Allen Test before radial arterial puncture?
To ensure that the ulnar artery can provide adequate collateral blood flow to the hand if the radial artery is damaged.
How does extreme altitude (\(>5,000\) ft) affect evacuated tube blood draw volume?
It causes a decrease in draw volume.
What is a common complication of phlebotomy regarding pediatric patients specifically?
Iatrogenic anemia, which results from blood loss due to frequent testing.
What effect does physical activity or exercise have on lactic acid levels in a patient's blood sample?
Exercise leads to an increase in lactic acid levels.
Which analytes may require protection from light during specimen handling?
What is the formula for Beer's Law, and what does each variable represent?
\(A = abc\), where \(A\) is absorbance, \(a\) is molar absorptivity, \(b\) is the light path (diameter of the cuvette in cm), and \(c\) is the concentration.
What are the wavelength ranges for ultraviolet, visible, and infrared light?
What is meant by linearity in spectrophotometry, and what happens when it is compromised?
Linearity refers to a direct relationship where a change in concentration results in a straight-line calibration curve. A loss of linearity can occur due to stray light or other errors, causing the absorbance not to match the concentration proportionally.
What are the two common types of double-beam spectrophotometers?
What is the primary principle of fluorometry?
Fluorometry, also known as molecular emission spectroscopy, measures the amount of light emitted by molecules that have been excited by a light source.
How do the materials used for cuvettes affect their application in spectrophotometry?
What is the fundamental mechanism of chemiluminescence?
Chemiluminescence is the measurement of light emitted during a chemical reaction, which is typically catalyzed by an enzyme, a metal, or hemin.
What are the two types of scintillation counting and their associated isotopes?
What is the difference between measuring light via turbidimetry and nephelometry?
Turbidimetry measures the amount of light blocked, while nephelometry measures the amount of light scattered by a suspension of particles.
Which immunoassay technique uses polarized light and a fluorescent label to measure low molecular weight substances?
Fluorescence polarization immunoassay (FPIA).
What is the primary role of insulin in regulating glucose?
It is the only hypoglycemic agent; it lowers plasma glucose levels by promoting cellular glucose uptake, glycolysis, and lipogenesis, while inhibiting glycogenolysis.
What is the physiological effect of glucagon on blood glucose?
It is a major hyperglycemic hormone; it increases plasma glucose levels by promoting gluconeogenesis and glycogenolysis, while inhibiting glycolysis.
What are the three components of Whipple's triad for diagnosing hypoglycemia?
What is the fundamental cause of Type 1 diabetes mellitus?
Autoimmune or idiopathic beta cell destruction leading to absolute insulin deficiency.
本当に削除しますか 0 単語カードを削除しますか?この操作は元に戻せません。
から削除するタグを選択してください 0 選択された単語カード:
タグを読み込み中...