Flashcards in this deck (30)

Searching...
  • 1

    What shape can a parabola serve as when inverted?


    It can serve as an arch.

    engineering structures
  • 2

    How does a catenary react to changes in loading?


    It changes shape to maintain a state of equilibrium.

    engineering catenary
  • 3

    What happens to a catenary shape under heavy snow load?


    It changes to a parabola shape.

    engineering load
  • 4

    What is a key advantage of an inverted parabola arch?


    It ends perpendicular to the ground.

    engineering arch
  • 5

    What must be assured for an inverted catenary to serve as an arch?


    Both supports must block horizontal forces.

    engineering catenary
  • 6

    What makes both catenaries and parabolas efficient as structural forms?


    Both can be funicular shapes.

    engineering structures
  • 7

    What change occurs in a catenary under loading?


    It reacts with a change of form.

    engineering load
  • 8

    What structural form can both the catenary and parabola take?

    Funicular shapes

    Complex shapes

    Solid shapes

    Flat shapes

    engineering structures
  • 9

    An inverted parabola serves as an arch and will always be in compression.

    engineering structures
  • 10

    A catenary has the ability to maintain equilibrium when changing shape.

    engineering catenary
  • 11

    With heavy loading, a catenary will transform its shape to a parabola.

    engineering load
  • 12

    The main characteristic of an efficient arch is that it ends perpendicular to the ground.

    engineering arch
  • 13

    What is the first step in the workflow of 2D Graphic Statics?


    Define the pole.

    graphic_statics workflow
  • 14

    What should be included in the Form Diagram?


    It should include supports and application of loads.

    graphic_statics form_diagram
  • 15

    What follows after defining the pole in Graphic Statics?


    Check internal, external, and overall stability of the system.

    graphic_statics stability
  • 16

    What is analyzed in Graphic Statics after checking stability?


    Analyze the forces in tension and compression.

    graphic_statics forces
  • 17

    What is the Force Polygon used for in Graphic Statics?


    It is used to analyze and represent forces graphically.

    graphic_statics force_polygon
  • 18

    Which step follows the analysis of forces?


    Finding suitable cross sections for realization.

    graphic_statics cross_sections
  • 19

    What is the funicular polygon used for?


    For visualizing the relationship between loads and form.

    graphic_statics funicular_polygon
  • 20

    The Graphic Statics workflow generally involves the steps: first, define the pole; second, check stability by looking at internal, external, and overall stability; then create the Form Diagram.

    graphic_statics workflow
  • 21

    What do you check after finding the pole in Graphic Statics?

    Check internal, external, and overall stability of the system

    Create funicular polygon

    Find suitable cross sections

    Analyze the forces in tension and compression

    graphic_statics stability
  • 22

    Which term refers to the analysis of graphical representations of forces?

    Stability check

    Cross section analysis

    Force Polygon

    Funicular polygon

    graphic_statics force_polygon
  • 23

    What is the significance of the funicular polygon in Graphic Statics?


    It shows the equilibrium shape of a structure under loads.

    graphic_statics funicular_polygon
  • 24

    In the context of Graphic Statics, what must be done after analyzing forces?


    Determine suitable cross sections for the design.

    graphic_statics design
  • 25

    Highlight a key difference between a parabola and catenary shape.


    A parabola results from constant force, while a catenary results from uniform loading.

    graphic_statics shapes
  • 26

    Define stress in materials.


    Stress is defined as the force distributed over the area of a cross-section, represented by the equation: \(σ = \frac{F}{A}\).

    engineering stress materials
  • 27

    What is the unit for measuring stress?


    The unit for stress is KN/m².

    engineering stress units
  • 28

    Stress is characterized by factors including: - dependence from the point of application - being a relevant material property - the strength of materials being dependent on stresses.

    engineering stress characteristics
  • 29

    Which of the following statements about stress is correct?

    The unit for stress is KN/m².

    Stress = Force distributed over the area of a cross-section

    Stress is a relevant material property

    Direction of forces in a beam

    The strength of material is dependent from the stresses.

    Magnitude of all forces

    engineering stress multiple_choice
  • 30

    Which configuration is stable?

    Structural diagram of an apparently unstable configuration with two roller supports and a downward force.

    Structural diagram of an apparently unstable configuration with a pin and roller support, subjected to an angled force.

    Structural diagram of a stable configuration with a pin and roller support, subjected to a horizontal force.

    Structural diagram of an apparently unstable configuration with three supports and applied forces.

    engineering stability
Study Notes

Parabola vs. Catenary

Parabola and Catenary

  • A parabola can be inverted to create an arch; it maintains compression only.
  • A catenary changes its form in reaction to loading, achieving equilibrium.
  • Under heavy snow loading, a catenary may resemble a parabolic shape.
  • An inverted catenary can also serve as an effective arch if its supports can withstand horizontal forces.
  • Both shapes can act as funicular forms, enhancing structural efficiency.

Graphic Statics Workflow

Graphic Statics Workflow

  1. Bow's Notation
  2. Evaluate internal, external, and overall stability
  3. Define the pole
  4. Create a Form Diagram (including supports and loads)
  5. Determine reaction forces
  6. Find suitable cross sections
  7. Analyze forces in tension/compression
  8. Construct a Force Polygon
  9. Estimate relevant loads
  10. Experiment with pole position and form changes
  11. Finalize funicular polygon and any closing strings.

Processing Workflow

Understanding Stress

What is Stress?

  • Definition: Stress is the force per unit area, expressed as: $$ ext{Stress} \, ( ext{σ}) = \frac{F}{A}$$
  • Characteristics:
  • Depends on the point of application.
  • Varies with material properties.
  • Measured in units of kN/m².

Quiz on Stress

Stability Configurations

Stability Analysis

  • Understanding configuration stability is crucial in structure design.
  • Analyze each configuration to determine stability.

Stable Configurations Quiz